Pacemaker Hardware Reference Platform Details

From Computing and Software Wiki

(Difference between revisions)
Jump to: navigation, search
(Created pacemaker hardware details page.)
m (Started adding BOM)
Line 2: Line 2:
== Introduction ==
== Introduction ==
 +
 +
 +
Here are some photos of the prototype hardware reference platform that we have produced.
 +
 +
 +
[[Image:PacemakerTop.png]]
 +
 +
The side photo show the standard 2mm power jack.  A 9-12V adapter providing 300mA should suffice.  You can even run the board off of a 9V battery for some time
 +
.
 +
 +
[[Image:PacemakerSide.png]]
 +
 +
The next photo shows the BNC and binding post connectors that we have put on so allow the boards to be easily connected to a PC running Labview or some other software to simulate a heart and facilitate testing and debugging.
 +
 +
[[Image:PacemakerIOConnectors.png]]
Here is the originial design of the Pacemaker Hardware Reference Platform.
Here is the originial design of the Pacemaker Hardware Reference Platform.
Line 9: Line 24:
We will be releasing the Bill Of Materials (BOM) and the schematics for the hardware once the design is finalized so that you can also produce your own boards if you would prefer to do that.  
We will be releasing the Bill Of Materials (BOM) and the schematics for the hardware once the design is finalized so that you can also produce your own boards if you would prefer to do that.  
 +
 +
{| border="1" cellpadding="20" cellspacing="0"
 +
|Qty
 +
|Reference
 +
|Description
 +
|MFR PART NUMBER
 +
|MFR
 +
|DIGI-KEY PART #
 +
|COST <1000
 +
|Total Cost $
 +
|-
 +
|4
 +
|C1-2 C67 C68
 +
|CAP 10UF 25V ELECT PW RADIAL
 +
|UVX1H100M
 +
|NICHICON AMERICA
 +
|UPW1E100MDH-ND
 +
| $0.07
 +
| $0.26
 +
|-
 +
|13
 +
|C14-15 C33 C45 C50 C9 C58-63 C84
 +
|CAP 1.5UF 10V CERAMIC X7R 1206
 +
|ECJ-3YB1A155K
 +
|Panasonic - ECG
 +
|PCC1867CT-ND
 +
| $0.29
 +
| $3.72
 +
|-
 +
|More
 +
|To
 +
|Come
 +
|}
== Scematic ==
== Scematic ==

Revision as of 20:53, 2 May 2008

Contents

Pacemaker Hardware Reference Platform Details

Introduction

Here are some photos of the prototype hardware reference platform that we have produced.


Image:PacemakerTop.png

The side photo show the standard 2mm power jack. A 9-12V adapter providing 300mA should suffice. You can even run the board off of a 9V battery for some time .

Image:PacemakerSide.png

The next photo shows the BNC and binding post connectors that we have put on so allow the boards to be easily connected to a PC running Labview or some other software to simulate a heart and facilitate testing and debugging.

Image:PacemakerIOConnectors.png

Here is the originial design of the Pacemaker Hardware Reference Platform.


Bill Of Materials (BOM)

We will be releasing the Bill Of Materials (BOM) and the schematics for the hardware once the design is finalized so that you can also produce your own boards if you would prefer to do that.

Qty Reference Description MFR PART NUMBER MFR DIGI-KEY PART # COST <1000 Total Cost $
4 C1-2 C67 C68 CAP 10UF 25V ELECT PW RADIAL UVX1H100M NICHICON AMERICA UPW1E100MDH-ND $0.07 $0.26
13 C14-15 C33 C45 C50 C9 C58-63 C84 CAP 1.5UF 10V CERAMIC X7R 1206 ECJ-3YB1A155K Panasonic - ECG PCC1867CT-ND $0.29 $3.72
More To Come

Scematic

Page 1

Image:Pacemaker_Rev10a_schematic_Page_1.png

Page 2

Image:Pacemaker_Rev10a_schematic_Page_2.png

Page 3

Image:Pacemaker_Rev10a_schematic_Page_3.png

Personal tools