Ethernet Routing Devices

From Computing and Software Wiki

Ethernet Routing Devices are devices which enable complete connectivity between more then two hosts on an Ethernet network without any host requiring more than a single network interface card (NIC). Each NIC connects directly to the routing device which handles the flow of data on the network. Multiple routing devices can be connected together in the same way to create even larger Ethernet networks.

Contents 1 Types of Ethernet Routing Devices 1.1 Hub 1.1.1 Advantages 1.1.2 Disadvantages 1.2 Switch 1.3 Router 2 References 3 See Also 4 External Links

Types of Ethernet Routing Devices

Hub

Ethernet Hubs work essentially like a shared bus. Every packet of data that enters the hub gets transmitted to all connected NICs.

Advantages

• No extra configuration needed. Just plug in the cables and it is ready to go.

Disadvantages

• Higher probability of collisions. Since every packet of information is transmitted to each NIC, it is more likely that a packet of data leaving from the NIC will collide with a packet leaving the hub. This results in lost data and a lower overall transmission rate.

Switch

Router

References

See Also

External Links