Broadband Over Powerlines (BPL)
From Computing and Software Wiki
| (2 intermediate revisions not shown) | |||
| Line 21: | Line 21: | ||
=== In-House BPL === | === In-House BPL === | ||
| - | In-house BPL is broadband access within a building or structure using the electric lines of the structure to provide the network infrastructure. In other words, in-house BPL is networking machines within the same building together by simply having each machine plug into an electric outlet. | + | In-house BPL is broadband access within a building or structure using the electric lines of the structure to provide the network infrastructure. In other words, in-house BPL is networking machines within the same building together by simply having each machine plug into an electric outlet. [http://www.homeplug.org/home Homeplug] is an alliance of several vendors of in-house BPL products which has authored a standard for device compliance. See Standards section below for more detail. [8,10] |
=== Access BPL === | === Access BPL === | ||
| - | Access BPL is the use of the electrical transmission lines to deliver broadband to the home. Access BPL is considered a viable alternative to Cable or DSL to provide the | + | Access BPL is the use of the electrical transmission lines to deliver broadband to the home. Access BPL is considered a viable alternative to Cable or DSL to provide the [http://en.wikipedia.org/wiki/Last_mile "last mile"] of broadband to end users. A BPL coupler placed at the pole converts the transmission medium from fiber optic (originating at the substation) to medium voltage power lines. Broadband signals traverse the medium voltage power lines, bypassing transformers, with repeaters placed every mile along the transmission path. At the final pole, a BPL wireless device can deliver the broadband to home-installed BPL wireless receivers, or, the signal can be sent to the individual homes via the low-voltage electrical lines and made available through any BPL wired receiver. [2,8,10] |
== BPL Modems == | == BPL Modems == | ||
| Line 32: | Line 32: | ||
| [[Image:Power_Line_Modem_200mbps.jpg|thumb|The BPL modem simply plugs into the wall and then into your computer. These modems are capable of speeds comparable to DSL or cable modems.]] | | [[Image:Power_Line_Modem_200mbps.jpg|thumb|The BPL modem simply plugs into the wall and then into your computer. These modems are capable of speeds comparable to DSL or cable modems.]] | ||
|} | |} | ||
| - | BPL modems use silicon chipsets specially designed to handle the work load of pulling data out of an electric current. Using specially developed modulation techniques and adaptive algorithms, BPL modems are capable of handling powerline noise on a wide spectrum. | + | BPL modems use silicon chipsets specially designed to handle the work load of pulling data out of an electric current. Using specially developed [http://en.wikipedia.org/wiki/Modulation modulation techniques] and adaptive algorithms, BPL modems are capable of handling powerline [http://en.wikipedia.org/wiki/Electromagnetic_interference noise] on a wide spectrum. |
| - | A BPL modem is plug and play and is roughly the size of a common power adapter. It plugs into a common wall socket, and an | + | A BPL modem is [http://en.wikipedia.org/wiki/Plug-and-play plug and play] and is roughly the size of a common power adapter. It plugs into a common wall socket, and an ethernet cable running to your computer finishes the connection. Wireless versions are also available. |
| - | BPL modems transmit in medium and high frequency (1.6 to 80 MHz electric carrier). The asymmetric speed in the modem is generally from 256 | + | BPL modems transmit in medium and high frequency (1.6 to 80 MHz electric carrier). The asymmetric speed in the modem is generally from 256 kbps to 2.7 Mbps. In the [http://en.wikipedia.org/wiki/Repeater repeater] situated in the meter room the speed is up to 45 Mbps and can be connected to 256 BPL modems. In the medium voltage stations, the speed from the head ends to the Internet is up to 135 Mbps. [9,10] |
== Managing Power Problems == | == Managing Power Problems == | ||
| - | The power flowing down high-voltage lines is between 155,000 to 765,000 volts. That amount of power is unsuitable for data transmission | + | The power flowing down high-voltage lines is between 155,000 to 765,000 volts. That amount of power is unsuitable for data transmission as it's too [http://en.wikipedia.org/wiki/Electromagnetic_interference "noisy"]. [10,13] |
| - | Both electricity and the RF used to transmit data vibrate at certain frequencies. In order for data to transmit cleanly | + | Both electricity and the RF used to transmit data vibrate at certain frequencies. In order for data to transmit cleanly, there must be a dedicated band of the radio spectrum at which to vibrate without interference from other sources. Hundreds of thousands of volts of electricity don't vibrate at a consistent frequency, and instead jump all over the spectrum, creating interference. If the interference spikes at a frequency that is the same as the RF used to transmit data, then it will cancel out that signal and the data transmission will be dropped or damaged. [10] |
| - | BPL bypasses this problem by avoiding high-voltage power lines all together. The system drops the data off of traditional fiber-optic lines downstream, onto the much more manageable 7,200 volts of medium | + | BPL bypasses this problem by avoiding high-voltage power lines all together. The system drops the data off of traditional fiber-optic lines downstream, onto the much more manageable 7,200 volts of medium voltage power lines. Once dropped on the medium-voltage lines, the data can only travel so far before it degrades. To counter this, special devices are installed on the lines to act as [http://en.wikipedia.org/wiki/Repeater repeaters]. The repeaters take in the data and repeat it in a new transmission, amplifying it for the next leg of the journey. [10] |
| - | In Current Communications Group's model of BPL, two other devices | + | In [http://www.currentgroup.com/ Current Communications Group's] model of BPL, two other devices are attached to power poles to distribute internet traffic. The CT Coupler allows the data on the line to bypass transformers. The transformer's job is to reduce the 7,200 volts down to the 240-volt standard that makes up normal household electrical service. There is no way for low-power data signals to pass through a transformer, so a coupler is needed to provide a data path around the transformer. With the coupler, data can move easily from the 7,200-volt line to the 240-volt line and into the house without any degradation. [2,10] |
== BPL Deployment == | == BPL Deployment == | ||
| Line 58: | Line 58: | ||
=== Amateur Radio === | === Amateur Radio === | ||
| + | |||
| + | The band of frequencies between 3 and 30 Mhz are commonly known as [http://en.wikipedia.org/wiki/Shortwave "shortwave"] frequencies. This part of the radio spectrum has very special properties not found elsewhere. With this band, one can communicate around the world with very low power levels, without the need for any equipment in between, such as satellites or repeaters. This is due to the fact that radio waves in this band can bounce off the ionosphere multiple times to get to the destination. [14] | ||
| + | |||
| + | [http://en.wikipedia.org/wiki/Amateur_radio Amateur radio], often called ham radio, transmits on shortwave frequencies. Due to the overlap of frequencies between amateur radio transmission and BPL, there have been reported cases of interference from amateur radio operators in areas of the United States and Europe where BPL deployment was being tested. A [http://www.youtube.com/watch?v=R6sYD3C0jo8 news story covering BPL and HAMs] was aired in 2007, and is available to watch online. [14,15] | ||
== Standards == | == Standards == | ||
| Line 82: | Line 86: | ||
== See Also == | == See Also == | ||
| - | [[ Alternative Technologies for Ethernet]] | + | *[[ Alternative Technologies for Ethernet]] |
| - | + | *[[Network-Based Software Architectures]] | |
| - | [[Network-Based Software Architectures]] | + | *[[Wireless Network Security]] |
| - | + | ||
| - | [[Wireless Network Security]] | + | |
== References == | == References == | ||
| Line 101: | Line 103: | ||
* [11] IEEE (2005). [http://standards.ieee.org/announcements/pr_BPL.html IEEE Begins Standard to Define Communication Channel for Broadband-Over-Powerline Systems]. Retrieved on April 9, 2008. | * [11] IEEE (2005). [http://standards.ieee.org/announcements/pr_BPL.html IEEE Begins Standard to Define Communication Channel for Broadband-Over-Powerline Systems]. Retrieved on April 9, 2008. | ||
* [12] Homeplug (2008) [http://www.homeplug.org/home Homeplug Power Alliance]. Retrieved on April 9, 2008. | * [12] Homeplug (2008) [http://www.homeplug.org/home Homeplug Power Alliance]. Retrieved on April 9, 2008. | ||
| + | * [13] Wikipedia (2008). [http://en.wikipedia.org/wiki/Electric_power_transmission Electric Power Transmission]. Retrieved on April 13, 2008. | ||
| + | * [14] Wikipedia (2008). [http://en.wikipedia.org/wiki/Amateur_radio Amateur Radio]. Retrieved on April 13, 2008. | ||
| + | * [15] ARRLWeb (2008). [http://www.arrl.org/tis/info/HTML/plc/other-articles.html Broadband Over Power Line (BPL) and Amateur Radio]. Retrieved on April 13, 2008. | ||
== External Links == | == External Links == | ||
Current revision as of 04:45, 14 April 2008
 |
Broadband over powerlines (BPL), also known as power-line internet or powerband, is the use of power line communication (PLC) technology to provide broadband internet access through ordinary electric power lines. A computer, or other device, needs only plug a BPL modem into any electric outlet in an equipped building to gain high-speed internet access. [1,9]
BPL works by coupling radio-frequency (RF) energy onto powerline wires, typically in the 1.6 to 80 MHz range, to transmit data without the need for a separate data line. The modulation scheme most often employed for BPL is orthogonal frequency division multiplexing (OFDM). [2,3,4]
BPL offers benefits over regular cable or DSL connections. The extensive infrastructure of the power companies, already in place, would allow people even in remote locations, where the fiber optics of the phone companies don’t reach, access to the internet with relatively little investment in equipment by the utility. Also, this ubiquitous availability makes it potentially easier for other electronic devices, such as televisions or sound systems, to connect to the internet or to network with one another. [2,5]
Contents |
Motivation for BPL Technology
Despite the proliferation of broadband technology in the last few years, there are still huge parts of the world that don't have access to high-speed Internet. When weighed against the relatively small number of customers Internet providers would gain, the cost of laying cable and building the necessary infrastructure to provide DSL or cable in rural areas is often too great. If broadband could be served through power lines, there would be no need to build new infrastructure. By slightly modifying the current power grids with specialized equipment, the BPL providers could partner with power companies and Internet service providers to bring broadband to everyone with access to electricity.
By providing high-speed data transmission between all of the electrical plugs in a house, there is also the potential to network all kinds of common appliances in a household. If your alarm clock, light switch and coffee maker could talk each other via a high-speed connection, mornings might be a lot different. [10]
Categories of BPL Service
There are two main categories of BPL service; in-house BPL and access BPL. [8]
In-House BPL
In-house BPL is broadband access within a building or structure using the electric lines of the structure to provide the network infrastructure. In other words, in-house BPL is networking machines within the same building together by simply having each machine plug into an electric outlet. Homeplug is an alliance of several vendors of in-house BPL products which has authored a standard for device compliance. See Standards section below for more detail. [8,10]
Access BPL
Access BPL is the use of the electrical transmission lines to deliver broadband to the home. Access BPL is considered a viable alternative to Cable or DSL to provide the "last mile" of broadband to end users. A BPL coupler placed at the pole converts the transmission medium from fiber optic (originating at the substation) to medium voltage power lines. Broadband signals traverse the medium voltage power lines, bypassing transformers, with repeaters placed every mile along the transmission path. At the final pole, a BPL wireless device can deliver the broadband to home-installed BPL wireless receivers, or, the signal can be sent to the individual homes via the low-voltage electrical lines and made available through any BPL wired receiver. [2,8,10]
BPL Modems
 |
BPL modems use silicon chipsets specially designed to handle the work load of pulling data out of an electric current. Using specially developed modulation techniques and adaptive algorithms, BPL modems are capable of handling powerline noise on a wide spectrum.
A BPL modem is plug and play and is roughly the size of a common power adapter. It plugs into a common wall socket, and an ethernet cable running to your computer finishes the connection. Wireless versions are also available.
BPL modems transmit in medium and high frequency (1.6 to 80 MHz electric carrier). The asymmetric speed in the modem is generally from 256 kbps to 2.7 Mbps. In the repeater situated in the meter room the speed is up to 45 Mbps and can be connected to 256 BPL modems. In the medium voltage stations, the speed from the head ends to the Internet is up to 135 Mbps. [9,10]
Managing Power Problems
The power flowing down high-voltage lines is between 155,000 to 765,000 volts. That amount of power is unsuitable for data transmission as it's too "noisy". [10,13]
Both electricity and the RF used to transmit data vibrate at certain frequencies. In order for data to transmit cleanly, there must be a dedicated band of the radio spectrum at which to vibrate without interference from other sources. Hundreds of thousands of volts of electricity don't vibrate at a consistent frequency, and instead jump all over the spectrum, creating interference. If the interference spikes at a frequency that is the same as the RF used to transmit data, then it will cancel out that signal and the data transmission will be dropped or damaged. [10]
BPL bypasses this problem by avoiding high-voltage power lines all together. The system drops the data off of traditional fiber-optic lines downstream, onto the much more manageable 7,200 volts of medium voltage power lines. Once dropped on the medium-voltage lines, the data can only travel so far before it degrades. To counter this, special devices are installed on the lines to act as repeaters. The repeaters take in the data and repeat it in a new transmission, amplifying it for the next leg of the journey. [10]
In Current Communications Group's model of BPL, two other devices are attached to power poles to distribute internet traffic. The CT Coupler allows the data on the line to bypass transformers. The transformer's job is to reduce the 7,200 volts down to the 240-volt standard that makes up normal household electrical service. There is no way for low-power data signals to pass through a transformer, so a coupler is needed to provide a data path around the transformer. With the coupler, data can move easily from the 7,200-volt line to the 240-volt line and into the house without any degradation. [2,10]
BPL Deployment
Deployment of BPL technology to provide high speed internet solutions has had noticeable impact on the world. A few key examples follow:
Smart Mosque Project
In March, 2008, BPL provider Velchip formalized three major partnerships to advance the world’s biggest BPL project. The first agreement was with investment firm Sarz Al Yahya Corporation, providing project financing of US$14 billion. Second, the company signed with US-based satellite infrastructure provider STM Networks Inc. who will use five satellites to provide communications services. Third, a 100-year agreement was exchanged with Nadhlatul Ulama Indonesia and Manhad Islam Hadhari, the Indonesian clients responsible for the network of mosques that will be converted during the BPL "Smart Mosque" project. [6,7]
According to the company’s chief executive officer Suhaimi Abdul Rahman, the US$14 billion “Smart Mosque” project will be rolled out over three years in Indonesia and will link together 400,000 mosques and serve 60 million users. The high speed internet connection of 224Mbps (megabits per second) will cost only RM5 (US$1.58) per user per month, making it the fastest and cheapest internet access in the world. [7]
Amateur Radio
The band of frequencies between 3 and 30 Mhz are commonly known as "shortwave" frequencies. This part of the radio spectrum has very special properties not found elsewhere. With this band, one can communicate around the world with very low power levels, without the need for any equipment in between, such as satellites or repeaters. This is due to the fact that radio waves in this band can bounce off the ionosphere multiple times to get to the destination. [14]
Amateur radio, often called ham radio, transmits on shortwave frequencies. Due to the overlap of frequencies between amateur radio transmission and BPL, there have been reported cases of interference from amateur radio operators in areas of the United States and Europe where BPL deployment was being tested. A news story covering BPL and HAMs was aired in 2007, and is available to watch online. [14,15]
Standards
Several competing standards are evolving for BPL technology including those of the IEEE and HomePlug Powerline Alliance. Currently, there is no globally accepted standard. [9]
IEEE
- IEEE 643-2004 "Guide for Power-Line Carrier Applications" is a standard for communication over the transmission line network (above 69kV).
- IEEE P1675 "Standard for Broadband over Power Line Hardware" is a working group working on hardware installation and safety issues.
- IEEE P1775 "Powerline Communication Equipment - Electromagnetic Compatibility (EMC) Requirements - Testing and Measurement Methods" is a working group focused on PLC equipment, electromagnetic compatibility requirements, and testing and measurement methods.
- IEEE P1901 "IEEE P1901 Draft Standard for Broadband over Power Line Networks: Medium Access Control and Physical Layer Specifications" is a working group for delivering broadband over power lines. The aim is to define medium access control and physical layer specifications for all classes of BPL devices - from long distance connections to those within subscriber premises.
- IEEE BPL Study Group — "Standardization of Broadband Over Power Line Technologies" drove the creation of the BPL related P1901 working groups. It still meets time-to-time looking to create new working groups if needed. [9,11]
Homeplug Powerline Alliance
The Homeplug Powerline Alliance is a trade group consisting of over 65 member companies. It was founded in March 2000 by leading technology companies to provide a forum for the creation of specifications for home power line networking products and services. The Alliance's mission is to enable and promote rapid availability, adoption and implementation of cost-effective, interoperable and standards-based home power line networks and products. The Sponsors and members of the Board of Directors of the Alliance include: Comcast, Earthlink, GE, Intel, Linksys, Motorola, Radio Shack, Samsung, Sharp, and Sony. The HomePlug Powerline Alliance has defined a number of standards: [9,12]
- HomePlug 1.0 — specification for connecting devices via power lines in the home
- HomePlug AV — designed for transmitting HDTV and VoIP around the home
- HomePlug BPL — a working group to develop a specification for to-the-home connection
- Homeplug CC — Command and Control is a low-speed, very low-cost technology intended to complement the alliance's higher-speed powerline communications technologies. The specification will enable advanced, whole-house control of lighting, appliances, climate control, security and other devices. HomePlugCC devices are available from Yitran Communications LTD and Renesas Techology. [12]
See Also
- Alternative Technologies for Ethernet
- Network-Based Software Architectures
- Wireless Network Security
References
- [1] Held, Gilbert. "Understanding Broadband over Power Line". CRC Press, 2006.
- [2] Mollenkopf, Jim (2004). Presentation to Cincinnati IEEE Meeting. Retrieved on April 13, 2008.
- [3] Wikipedia (2008). Orthogonal frequency-division multiplexing. Retrieved on April 9, 2008.
- [4] Wikipedia (2008). Radio Frequency. Retrieved on April 9, 2008.
- [5] Trull, Bruce. "An Overview of Broadband over Power Line (BPL)". Rivier College, 2006.
- [6] Velchip (2008). Velchip. Retrieved on April 9, 2008.
- [7] Computerworld Malaysia (2008). Velchip Signs Three Major Partnership Deals to Advance the World’s Biggest Broadband Powerline Project. Retrieved on April 7, 2008.
- [8] Warkentin-Glenn, Denise. "Electric Power Industry in Nontechnical Language". PennWell Books, 2006.
- [9] Wikipedia (2008). Power Line Communication. Retrieved on April 6, 2008.
- [10] Howstuffworks (2008). How Broadband Over Powerlines Works. Retrieved on April 7, 2008.
- [11] IEEE (2005). IEEE Begins Standard to Define Communication Channel for Broadband-Over-Powerline Systems. Retrieved on April 9, 2008.
- [12] Homeplug (2008) Homeplug Power Alliance. Retrieved on April 9, 2008.
- [13] Wikipedia (2008). Electric Power Transmission. Retrieved on April 13, 2008.
- [14] Wikipedia (2008). Amateur Radio. Retrieved on April 13, 2008.
- [15] ARRLWeb (2008). Broadband Over Power Line (BPL) and Amateur Radio. Retrieved on April 13, 2008.
External Links
- Power Line Communication
- How Broadband over Powerlines Works
- BPL Presentation to IEEE
- BPL Interference Wiki
- BPL Interference Resolution Website
--Harrisds 23:58, 13 April 2008 (EDT)
